Detectors
!
PEM7DBI
Klik hier

ENKELE FOTO-ELEKTRISCHE SENSOR MET REFLECTOR - FLUSH-MONTAGE - 7m

Kenmerken

  • beslaat niet
  • flush-montage
  • detectie met retro-reflectie
  • dankzij de ingouwde polarisatiefilters herkent de sensor ook objecten met een spiegelend oppervlak

Specificaties

  • bereik: 7m
  • LED aanduiding vergemakkelijkt de montage:
    • gele LED:
      • straal afgebroken: ON
      • ingeschakeld en straal uitgelijnd: OFF
    • rode LED: voeding
  • responstijd: 10ms
  • alarmsignaal: 1A/125VAC of 24VDC
  • voeding: 12-18VDC
  • verbruik: 50mA
  • montagehoek: ±15°
  • werktemperatuur: -10°C tot 50°C
  • afmetingen: 120 x 70 x 35mm
PEMSS
Klik hier

REFLECTORKAP VOOR PEM-SERIE

Kenmerken

  • beschermt de reflector (PEM-serie) tegen directe inval van de zonnestralen
  • voor:
    • ronde reflector: Ø80mm
    • vierkante reflector: 50 x 50mm

Specificaties

  • afmetingen: Ø100 x 60mm
HAA50
Klik hier

CEILING-MOUNTED PIR DETECTOR

The HAA50 ceiling-mounted passive infrared detector is designed for use with modern residential and commercial security systems. This device is fitted with pulse-counting circuitry and employs a pyroelectric sensor equipped with 2 elements that provide substantial immunity against false alarms caused by environmental factors.

Specifications

  • detection pattern : 360° conical pattern, Ø 11m when installed at a height of 3.6m
  • operation voltage : 8 - 16Vdc
  • quiescent current : 15mA typical at 12Vdc
  • relay output : normally closed (fail-safe) dry relay contact, 18ohm resistor is connected with the contact in series
  • alarm activation delay : 2 - 3 seconds
  • tamper output : normally closed contact
  • LED : walk-test enabled or disabled with internal link
  • pulse counter : single- or double-pulse detection through alternating signal polarity
  • mounting height : 3.6m max.
  • dimensions : 87 x 26mm
HAA51
Klik hier

PIR DETECTOR

The HAA51 PIR detector is designed for advanced commercial and residential security systems. The device detects the movements of an intruder in the detection zone. The HAA51 displays a number of characteristics that are mostly reserved for advanced professional systems. The electronic wiring is state-of-the-art and guarantees excellent performance and reliability. The detector uses a dual-element pyroelectric sensor and a built-in "daylight" filter. This filter protects the device from strong hot or cold air currents, sudden changes in ambient temperature, noise, etc.

Features

  • the dual-element pyroelectric sensor and the pulse counter provide substantial immunity from false alarm
  • Fresnel lens array offers good coverage of the detection range
  • 24 dual-element detection zones for long-, mid- and short-range protection
  • the shape of the back panel ensures easy installation
  • surface or corner mounting without extra accessories
  • single-shot or pulse-count triggering selectable
  • Specifications

    • detection pattern : 84.2° span, range 12m
    • detection zones : 24 dual-element zones in 3 layers
    • LED indicators : one pattern locator / one alarm / walk test indicator with "alarm" or " walk" position
    • mounting height : 2m, tilting angle for back plate 13.96°, installation without height adjustment
    • mounting location : indoors only, on a flat surface or in a corner
    • operation voltage : 8 - 16Vdc, 12Vdc nom.
    • quiescent current : 15mA typical at 12Vdc
    • sensor : dual-element pyroelectric sensor with daylight filter
    • triggering mode : pulse-count or single-shot activation selectable (factory setting : pulse-count activation)
    • alarm output : normally closed relay contact, 0.1A / 28Vdc rating
    • alarm activation delay : 2 seconds typical
    • tamper contact : normally closed when depressed, 50mA / 12Vdc rating
    • operating temperature : -10°C to +55°C
    • dimensions : 116 x 73.5 x 74mm
    • weight : 160g
HAA52
Klik hier

PIR INTRUSION MINI DETECTOR

The HAA52 is a miniature PIR intrusion detector. This reliable low-cost detector is used for general security applications. The device can be installed virtually anywhere and is protected by an RFI filter. The contact is N.C. and the HAA52 offers substantial immunity from false alarms and sabotage.

Features

  • dual-element pyroelectric sensor
  • programmable pulse counter
  • 12° vertical angle adjustment
  • wide detection angle : 90°
  • RFI protection
  • wide operating voltage range : 8-16Vdc
  • surface and corner mounting
  • Specifications

    • detection pattern : wide angle, 12 x 12m, 90°, max. 42 beams in 3 layers
    • adjustment : vertical 0° to -12° on a calibrated scale
    • mounting height : up to 5m above floor level, indoor mounting only
    • operating voltage : 8 to 16Vdc
    • current drain : 15mA typical
    • alarm output : normally closed (fail-safe) dry relay contacts (rating : 0.5A/24Vdc ; resistor of 8ohms in series with contacts)
    • alarm activation delay : 2 to 3 seconds
    • tamper contacts : normally closed microswitch with dry contacts (rating - 0.5A / 24Vdc)
    • detection modes : single-shot or pulse-count detection
    • LED indicator : walk-test indication ON or OFF (selectable)
    • dimensions : 55 x 31 x 73mm
    • weight : 50g
HAA53
Klik hier

SUPERWIDE PIR DETECTOR

Features

  • small size : thanks to SMD technology
  • comes with : 4 interchangeable lenses
  • ultra-high level RF/EM protection
  • with temperature compensation
  • programmable pulse count
  • low-noise pyroelectric detector
  • surface, corner or ceiling mounting
  • tamper protection
  • silent relay output
  • programmable walk test LED
  • Specifications

    • lens types :
      • lens 1 : wide angle
        • mounting height : 2.5m
        • distance :
          • 1st zone (110°) : 14m
          • 2nd zone (180°) : 6m
      • lens 2 : long distance
        • mounting height : 2.5m
        • distance :
          • 1st zone (110°) : 21m
          • 2nd zone (180°) : 6m
      • lens 3 : pet
        • mounting height : 1.3m
        • distance :
          • zone 110° : 12m
      • lens 4 : curtain
        • mounting height : 2.5m
        • distance :
          • zone 20° : 14m
    • power supply : DC 9-16V
    • current consumption : 25mA
    • output relay : NC 24V / 0.5A
    • dimensions : Ø65 x 45mm
HAA54
Klik hier

PIR SENSOR WITH DOUBLE TWIN OPTICS

Features

  • double-twin-optics detection technology
  • SMD-technology for greater EMI and RFI immunity
  • detects the real intruders and ignores pets and rodents
  • automatic temperature compensation
  • fast or pulse-count response for difficult environments
  • with tamper switch
  • Specifications

    • detection method : alternating polarity, 2 pyro-optic elements, passive infrared
    • power-up delay : 2 minutes with flashing LED indication
    • alarm activation delay : 2-3 seconds
    • pulse count : instant response or 2 pulses within 12 seconds
    • walk test LEDs : CH1, CH2 and alarm indicators
    • alarm output : NC relay 28Vdc 0.1A
    • power supply : 12Vdc (9-16Vdc) / 15mA typ.
    • operating temperature : -10°C to +55°C with temperature compensation
    • dimensions : 127 x 64 x 45mm
PEM300D
Klik hier

TWIN PHOTOBEAM DETECTORS (SENDER/RECEIVER)

range :
  • outdoor : 30m (100ft)
  • indoor : 60m (200ft)
  • Specifications

    • power supply : 10 ~ 30V DC
    • detection system : simultaneous breaking of 2 beams
    • response time : 50ms ~ 700ms (variable)
    • alarm output : NC/NO 1A/120VAC
    • tamper output : NC 1A/120VAC
    • LED indicators :
      • alarm LED (receiver) : red LED on - when transmitter and receiver are not aligned or when beam is broken
      • signal LED (receiver) : yellow LED on - when receiver's signal is weak or when beam is broken
      • power LED (transmitter & receiver) : green LED on - indicates that device is ON
    • wave length : 650nm
    • laser output power : max. 5mW
    • IP rating : IP55
    • alignment range :
      • horizontal : ± 90°
      • vertical : ± 15°
    • operating temperature : -25°C to +55°C
    • dimensions : 170.5 x 74 x 72mm
    • weight : 1.1kg
PEM30D
Klik hier

PHOTOELECTRIC BEAM SENSOR (30m)

Features

  • universal power supply
  • IP66 waterproof
  • highly reliable performance
  • applications :
    • detection of intruders in industrial applications
    • garage door security
    • entry detection
    • parking position
    • intrusion alarm

Specifications

  • detection type : through beam (long-range)
  • model : dark-on
  • sensing range : 0.1 to 30m
  • voltage supply : DC 12~240V ± 10% or AC 24~240V ± 10%
  • response time : 10ms max.
  • emitting element : IR LED
  • operation indicator : yellow LED (stable) / red LED (comes on when output is in the ON state)
  • output : relay contact 1C (250V AC 0.3A / 30V DC 0.6A)
  • environmental protection : IP66
  • working temperature : -20°C to +55°C
PEM3D
Klik hier

PHOTOELECTRIC SENSOR WITH REFLECTOR (3m)

Features

  • weatherproof : IP66

Specifications

  • detection : retro reflection
  • light source : IR LED (modulated)
  • range : 4m max.
  • power supply : AC/DC24V - 240V ±10%, 50/60Hz
  • power consumption : 1.6W
  • operating mode : comes on at dark ("dark-on")
  • output mode : relay output 1C AC 250V 2A non-inductive
  • response time : 25ms
  • hysteresis : 20% (max.)
  • ambient light : 20000lux (max.)
  • connection : 1m cable length (Ø6.5mm)
  • weight : 120g
  • dimensions reflector : 40 x 60 x 8mm
  • relay output : max. 1000W
PEM7D
Klik hier

MINI INFRARED SECURITY SYSTEM (7m)

Features

  • easy to install
  • adjustable timer & volume
  • applications :
    • entry detection
    • automatic alarm warning
    • present detection
  • includes :
    • 1 x retro-reflection IR photoelectric beam sensor
    • 1 x power supply 230V / 9V DC / 200mA
    • 1 x alarm speaker (timer & volume adjustable)

Specifications

  • nominal detection range : 7m
  • light source : IR LED
  • speaker :
    • power supply : DC 9V
    • speaker output : chime / off / alarm (selection through by switch)
    • duration audio signal : about 1 sec. for chime, 30 sec. for alarm
    • timer adjustable : 3 - 30sec. before alarm activation
    • volume adjustable : yes (from 0 to max)
    • external output : NPN output (for external device)
  • working temperature : -20°C to +50°C
  • power supply : DC 9-15V regulated (adapter included)
  • total current consumption : < 100mA
  • standby current : 25mA
951
Klik hier

ULTRASONIC DETECTOR WITH TWO SEPERATE HEADS

Detects glass breakage or other movements within the car.

Features

  • professional design
  • separate detectors
  • adjustable sensitivity
  • easy installation
  • LED indication

Specifications

  • voltage supply : 12Vdc
  • wire length : ± 2m
  • dimensions : 73 x 50 x 25mm (detectors : Ø12 x 20mm)
959
Klik hier

RADAR INTRUSION DETECTOR

This model emits a high-frequency energy field that immediately detects intrusions. Ideal for open cars, boats, etc.

Features

  • not affected by wind, temperature, sound or vibrations
  • concealed installation possible
  • LED indication
  • adjustable sensitivity

Specifications

  • power supply : 12Vdc (15mA max.)
  • dimensions : 78 x 55 x 22mm
04.2520
Klik hier

Infrared motion detector, digital detector NEXT

Pulse counter for preventing false alarms
Anti-tampering contact
Walk test
Matching brackets BR–1 and BR–3 are available at option
12x12m, 9-16VDC,  alarmkontact NC/0.1A/30V,  63x94x49mm
HAA79N
Klik hier

DETECTOR MET ALARM VOOR BRANDBARE GASSEN

Kenmerken

  • zichtbaar en hoorbaar alarm
  • de leds en de numerieke display geven het niveau van het gaslek aan
  • 3 aanduidingen: POWER, STATE, ALARM

Specificaties

  • opspeurbare gassen: lpg, aardgas en steenkoolgas
  • voeding: 100VAC - 240VAC ~ 50/60Hz
  • verbruik: < 4W
  • alarmniveau:
    • lpg: 0.1% - 0.5%
    • aardgas: 0.1% - 0.3%
    • steenkoolgas: 0.1% - 0.5%
  • alarmvolume: > 85dB
  • temperatuurbereik: -10°C ~ 50°C
  • relatieve vochtigheidsgraad: < 97% RH
  • opslagtemperatuur: -25°C ~ 55°C
  • afmetingen: 67 x 67 x 112mm
  • gewicht: 122g